Product Description

BQ04-1 ACRYLIC NITROCELLULOSE ENAMEL is a single component, self-dried finish coating, which has performance of fast dry, even and gloss, as well as good climate-resistance.

Intended uses

Suitable for surface safeguard decoration of all kinds of vehicles, machine tools, machinery equipments, meters and furnitures, as well as used for coating on the plastics.

Service Temperature

Maximum service temperature is up to 60 ℃ in dry condition.

Coating Data

Colour: wild range

Gloss level: Glossy

Volume Solids: ≥ 34%

V.O.C.: ≤ 66%

Typical Thickness: 21 ± 3 macrons ( dry film)

Dry (25 ℃ ): Touch dry ≤ 10 min, Hard dry ≤ 50min

Application Details

Application Method: Air spray

Air pressure: 3 kg / cm2 or around

Thinner: NITROCELLULOSE THINNER

Surface Preparation

1. All metallic surface to be coated for the first time should be cleaned and free from contamination such as grease, inorganic salt, duct and so on. May perform the distinguish and treatment in accordance with the standard ISO8504-1:1992.

2. Any surface with old paint should be cleaned and free from contamination such as grease., dust and water. And then be partially repaired. May perform the distinguish and treatment in accordance with the standard ISO8504-1:1992

3. Areas of breakdown, damage etc., should be prepared to the specified standard (e.g. Sa2-1/2 --- ISO8501-1:1988).

4. Before application of this topcoat, the surface to be coated should be have existed primer, both alkyd primer or epoxy primer can be utilized.

Application Precautions

1. Prior to application, stir this material thoroughly to a uniform consistency. Filter to be free of coarse grains and mechanical impurities by means of eye 120 mesh.

2. Mainly application method should be spray. The recommended thinners are COLOUR-WAY own products X-1 / X-2 NITROCELLULOSE THINNER and X-48 ACRYLIC THINNER, with its dosage is 1 ~ 1.5 times of original paint, which should be adjusted according to actual climate and temperature.

3. If in wet weather, F-1 NITROCELLULOSE RETARDER THINNER may be properly utilized to reduce film from blanching phenomenon.

4. As this product contains the V.O.C. solvent, in confined spaces must provide adequate ventilation during application and drying.

Storage

Storage Condition: Store in dry, shaded condition away from shining and heat source.

Shelf Life: 12 months minimum at 25 ℃ . As to those paint, which is over than shelf life but is inspected well just then, is permitted to be still in the use.

 

SUZHOU COLOURWAY ENTERPRISE DEVELOPMENT CO., LTD

ADD: SHENJIA ROAD , DONGQIAO INDUSTRY DEVELOPING ZONE, XIANGCHENG DISTRICT, SUZHOU

PHONE: 0512-65376968

FAX: 0512-65376978

ZIP: 215152