| A04-9各色氨基烘干磁漆 |
|
| |
1、组成 |
|
| |
该漆由醇酸树脂与颜料镜研磨后，加入氨基树脂及有机溶剂调制而成。
|
|
| 2、性能： |
|
漆膜色彩鲜艳，光亮坚硬，并具有良好的柔韧性、冲击强度和耐水性，该漆若与X06-1磷化底漆、H06-2环氧酯底漆和
耐水性，该漆若与X06-1磷化底漆、H06-2环氧酯底漆配套使用，具有更好的耐湿热、乃盐雾性能。
|
|
| 3、用途 |
|
主要用于各种轻工产品、机电、仪表、玩具等金属表面作装饰保护涂料。
|
|
| 4、主要技术指标： |
|
项目 |
技术指标 |
漆膜颜色加外观 |
符合标准色板及
色差范围、平整光滑 |
粘度（涂-4杯粘度计） |
|
干燥时间 hs
红、白及浅色
（105±2℃）
深色（120±2℃）
|
2
2
|
光泽 % ≥ |
90 |
硬度 ≥
红、白及浅色
|
2
|
深色 |
0.5 |
柔韧性 mm |
1 |
冲击强度 cm |
50 |
附着力 级≤ |
2 |
耐水性 60h |
不起泡，允许轻微变化，
能于3h内恢复 |
4）配套品种：
底漆：X06-1磷化底漆、H06-2环氧酯底漆。
腻子：H07-34各色环氧酯烘干腻子、H07-5各色环氧腻子。
清漆：A01-1、A01-2、A01-9氨基烘干清漆等。
|
|
| 5、使用说明：（施工参考） |
|
（1）使用前必须将漆搅拌均匀粗粒、机械杂质。必须进行过滤。
（2）施工以喷涂为主，稀释剂可用X-4氨基稀释剂活二甲苯和丁醇（4：1）的混合溶剂稀释。
（3）喷涂后工件应在室温静置5分钟以上再进入装有鼓风装置的烘箱。严忌有一氧化碳等污气存在。
|
|
| 6、标志、包装、贮存和运输 |
|
按Q/320500 ZQ02-90《涂料产品标志、包装、贮存和运输规则》执行，有效贮存期为一年。
|
|
| A04-9 Baking Amino-alkyd Enamel in colours |
|
| 1、Composition |
|
| The products is formulated with alkyd rosin,amino resin,grinded pigments and organic solvent. |
|
| 2、Performance |
|
| The paint film shows high hardness,glossy,vivid colours,good in toughness,impact strength andwater resistance. |
|
| 3、Application |
|
| The paint is mainly used in metal surfaces of various light industrial products,machines,electrieappliances,instruments and toys. |
| 4、Maint technical index |
Item |
Index |
1)Film
Colour and appearance |
Smooth and bright In accordance with standard sample
and its range of colour difference |
2)Viscosity |
|
Ford cup No.4 at 25 ℃ ≥ |
40 |
3)Fineness, μm ≤ |
20 |
4)Drying time,hours |
2 |
red,white and light colour
at 105±2℃ ≤ |
2
|
dark colour
at 120±2℃ ≤ |
2
|
5)Glass,% ≥ |
90 |
6)Hdardness
red,white and light ≥ |
0.4
|
dark ≥ |
0.5 |
7)Toughness,mm ≤ |
1 |
8)Impact strength,cm ≥ |
50 |
9)Adhesion,grade ≤ |
2 |
10)Water resistance,
60hours |
No blistering slight blushing is allowed and recover in 3 hours |
|
| 5、Application directions |
1)Before application,the paint should be stirred to uniform.If there are grains or mechanical impurity,
the paint should be filtrated.
2)The paint should be applied with spraying.X-4 amino diluent or xylene-butanol(4:1)solvent may be used to
reduce the viscosity.
3)Having been sprayed,the object should be placed in well-ventilation at room temperature for more than
5 minutes, then put into the oven fitted with blast,free from carbon monooxide gas.
4)Varieties to be used with
Primer:X06-1 phosphate primer or
H60-2 epoxy ester primer
Putty:H07-34 Baking epoxy ester putty or
H07-5 epoxy ester putty in colours
Varnish:A01-1 or A01-2 or A01-9 Baking aminoalkyd varnish |
| 6、Mark,Package,Storage and Trancsportation |
Carry out Q/320500 ZQ02-90"The regulations of Mark,Package,Storage and Transporlation for paint Products"
The shelf life is one year.
|
|
|
<<返回