<<返回
 
C01-1醇酸清漆  
  1、组成  
    C01-1醇酸清漆是干性油该性的中油度醇酸树脂,溶于松节油或200号溶剂汽油与二甲苯的混合溶剂中,并加入少量催干剂调配而成。
 
2、性能:  
  漆膜具有良好的附着力和防锈性能,与硝基、醇酸等多种面漆配套使用,结合力好。
 
3、用途  
  该产品是一种使用十分广泛的通用型防锈底漆,用于黑色金属表面打底防锈,也可用于木材制品打底用。
 
4、主要技术指标:  
项目
指标
漆膜颜色和外观
铁红色、色调不定、漆膜平整
粘度(涂——4计)  S
60
细度     μm
50
干燥时间    h
表  干
2
实  干

24

烘干(105±2℃)  h
0.5
冲击强度   cm
50
附着力   级
1
耐硝基性
不咬起、不渗色
 
5、使用说明  
  (1)喷涂、刷涂均可。用X-6醇酸稀释剂调整施工粘度,涂覆后,如在105±2℃下烘干,可使漆膜性能更好。
   (2)配套面漆为纯酸磁漆、氨基烘漆、沥青漆、过氯乙烯漆等。
 
6、标志、包装、贮存和运输  
 按Q/320500ZQ02-90《涂料产品标志、包装、贮存和运输规则》执行。有效贮存期为一年。
 
c06-1 lron-red Alkyd Primer  
1、Composition  
  It is foumulated with drying plant oil modified alkyd resin (medium or long oil length),iron oxide red,rust preventive pigments,extenders,additives
and solvent.
 
2、Performance  
  Its film is of good adhesion and rust resistance.It combines well with vatieties of top paint such as nitrocellulose lacquer and alkyd resin paint,and has a
good overcoatability.
 
3、Application  
  Being a primer of general rust prevention ,it is widely used in priming on the surface of metallic stuff or woodworks.
4、Maint technical index
Item
Index
1)Film
smooth
colour and appearance
Iron-red,without tone requirement
2)Viscosity ,Ford 4 cup
sceonds       
60
3)Fineness  μm    ≤
50
4)Drying time ,hours

 

surface dry     ≤
2
complete dry    ≤
24
Baking dry,at 105±2℃  
0.5
5)Impact strength,cm
50
6)Adhesion,grade
1
7)Nitro-lacquer resistance
No lifting,No bleeding
5、Application directions

1)Both spraying and brushing ate available ,X-6 alkyd thinner can be used to adjust the viscosity of application.
   Baking the wet film at 60-70 may improve the water resistance of the film obviously.
2)Recommend several varieties of top coat to form a complete set,they ate alkyd enamel,a baking amino-alkyd enamel ,asphalt paint and perchloroviny1
enamel lacquer etc.

6、Mark,Package,Storage and Trancsportation

Carry out Q/320500 ZQ02-90《The Regulations of Mark,Package,Storage and Transportation forPaint Products.》
The storage life is one year.